Engine bay

Another mid day update…

Engine is back out:
[img]https://lh6.googleusercontent.com/-GSBZD9_QRYU/UcMwyVyprxI/AAAAAAAAG-8/MhKK1bNiP_o/s640/IMAGE_70.jpeg[/img]

ABS pump location
[img]https://lh6.googleusercontent.com/-Ud-fBkpTFEU/UcMwoXZh_qI/AAAAAAAAG-c/tpC5zJh-DFA/s640/IMAGE_66.jpeg[/img]

ABS pump brackets
[img]https://lh4.googleusercontent.com/-xh5uA_IbN8k/UcMw3H3A01I/AAAAAAAAG_M/PWMT1TtPRF8/s640/IMAGE_72.jpeg[/img]

Engine bay getting ready for some fresh paint
[img]https://lh6.googleusercontent.com/-GKYaoZ8M5Dk/UcMw_goIZBI/AAAAAAAAG_o/9OavINvkOD4/s640/IMAGE_75.jpeg[/img]

pulled the old hood liner
[img]https://lh3.googleusercontent.com/-R2s32pKGrsI/UcMxIM2Po-I/AAAAAAAAG_w/B4w2rsEY5EI/s640/IMAGE_76.jpeg[/img]

More flare work
[img]https://lh4.googleusercontent.com/-c85BtJDDcDM/UcMxOPcsLZI/AAAAAAAAHAI/GdOnnqsCZ5M/s640/IMAGE_79.jpeg[/img]

[img]https://lh5.googleusercontent.com/-8ImKhkqKqRc/UcMxPyMqNTI/AAAAAAAAHAQ/A9GiHTC8ciU/s640/IMAGE_80.jpeg[/img]

[img]https://lh6.googleusercontent.com/–jYDCR87jCY/UcMxR42XbUI/AAAAAAAAHAY/pzpYKt0u97E/s640/IMAGE_81.jpeg[/img]

 

Brake lines to ABS pump all extended…and off to powder coat
[img]https://lh4.googleusercontent.com/-3qlnUoi7de4/UcjKJu_lvKI/AAAAAAAAHBc/EDKvr6hZS6Q/s640/IMAGE_87.jpeg[/img]

Jigged the trans mount before going off to powder coat
[img]https://lh6.googleusercontent.com/-O45n3x7bCcY/UcjKGPsZnMI/AAAAAAAAHBM/SfCnYRjWadA/s640/IMAGE_85.jpeg[/img]

Engine mounts are off to be coated as well and then they will get jigged…the powder coater I use also does Lathe work and he is making me a plug to make the engine mount jig.

Passenger side header jigged and ready to weld
[img]https://lh3.googleusercontent.com/-aB7wgNOU6f0/UcjKQGYqHWI/AAAAAAAAHB0/of1Tmrhcd2o/s640/IMAGE_90.jpeg[/img]

header off…
[img]https://lh5.googleusercontent.com/-PtyUHN4r3EA/UcjKjNfwqoI/AAAAAAAAHC4/Up_MQHzYiDg/s640/IMAGE_98.jpeg[/img]

Drivers side
[img]https://lh5.googleusercontent.com/-Xca7I2C9jD8/UcjKm9ElXPI/AAAAAAAAHEk/XPDd6vXcfZc/s640/IMAGE_100.jpeg[/img]

Both together…Once the headers are all welded up I will add a locator for the vband and collector
[img]https://lh5.googleusercontent.com/-XvbyTaDuTO8/UcjKwYq_eMI/AAAAAAAAHEs/YsQXAQGvw5U/s640/IMAGE_105.jpeg[/img]

Cart