Front flares

Porsche 997 Brembo calipers….4 piston.

Started on the fender flares…
Start with an e46 sedan after market fender.

Cut the flare out

Stock e36…

With the e46 flare

difference between the two

About where it will be…the e46 bit needs to be trimmed down some more.

Fitment up front

It will have to blend in here somewhere.

Some wheel on shots…the FCAB isn’t on so I had to hold the wheel a bit.

Right now with a 15mm spacer the tire is just touching the coil over adjuster. Either have to run a spacer that is just a little thicker or move the spring perch up or down a bit. I would rather go with a little thicker spacer and have full control over the preload on the spring. I will space with some washers first just to see what will be needed.

This guy wanted to help a little