Should keep this thread updated as the project is moving along.

This car is also getting some interior upgrades.
First going from tan to black.
Dyeing the carpet….1st step is to clean it a ton

Then start spraying on some dye.

fresh dash as well

Seats getting heat added.

Black vert sports

Due to the plenum we needed to remove the booster. So we are going to increased leverage from the brake pedal and also a smaller master cylinder 19mm/19mm

I started with the massive booster delete but it didn’t work. So I had something similar made at the water jet…twice. Things are fitting now.

The progression…

The master is just for mock up.