Rebuilding CV joints
This is a dirty job but oh so rewarding.
As long as the joints are not worn these can be rebuilt by just cleaning and reassembling with new grease and boots.
Let us know if you need some boots and we can ship them to your door!
CLEAN CLEAN CLEAN
Line up the cage and star, big goes to small.
Start rocking the bearings in, use a little grease.
All of them are in.
Install new boot on the axle and put in some grease
Slide the joint on
Install the circlip.
Pack with grease, rock back and forth when this.
New clamps on and DONE, have a cookie.
