BMW 2002 m20 Swap Mounts
These mounts allow you to install an e30 m20 into a 2002. These are made to push the engine back as far as possible This does require you hammer the heater tray area slightly where the coolant pipe on the back of the head is. Engine mounts also locate the engine fairly low. Transmission tunnel will need to be cut or hammered depending on if you have an auto or 4 speed car. These mounts were made to work with the g260 but a g250 or g240 would be a nicer fit. Price is for engine and trans mounts. Mounts come with a poly mount for the passenger side. Drivers side uses stock 2002 mount. Best to use a poly mount here as well.
|Dimensions||16 × 10 × 8 in|